Home > Applications > Content
Precautions for using woodworking engraving machines
- Feb 02, 2018 -

1. Woodworking engraving machine running time under 10 hours a day in a row, guarantee the normal work of the cooling water clean and the water pump, must not water shortage phenomenon in a water-cooled spindle motor, regular replacement of cooling water, in order to prevent the water temperature is too high, circulating water as much as possible, can change the large capacity water tank.

2, woodworking engraving machine machine each time after use, should pay attention to clean up, be sure to clean up the dust on the platform and the transmission system, on a regular basis (weekly) for transmission (X.Y.Z triaxial) lubricating system.

3. If the woodworking engraving machine is not used for a long time, it should be refueled regularly (weekly) to ensure the flexibility of the transmission system.

4. The woodworking engraving machine shall clean the dust in the electrical box regularly (in accordance with the usage), and check whether the screws of the wiring terminal are loose, so as to ensure the safe and reliable use of the circuit.

5. The woodworking engraving machine shall check whether the screws of the machine are loose on a regular basis (in accordance with the usage).